Description
Super-compact HDBaseT extender set capable of transmitting 4K UHD video and HD audio formats up to 35m/115ft of Cat5e cable. Also compatible with HDCP2.2 protected content, the EX-70-G2 has powerful bi-directional pass-through of CEC, IR and RS-232. 2-way PoH means device can be powered from either end for flexible installation options.
UHD & HD BEST OF BOTH WORLDS
We might live in a 4K world, but not every application needs it. Compatible with the latest 4K/60 and 1080p sources alike, the EX-70-G2 delivers whatever content you have, wherever its needed.
2-WAY POH FOR FLEXIBLE INSTALL
No two installs are the same, which is why the EX-70-G2 and all H2 Series extenders can be powered from either TX or RX side for the most convenient and flexible installation imaginable.
SMALL BUT POWERFUL
Weighing in for the featherweight title at just 15mm thick, the EX-70-G2 can be installed just about anywhere, but still packs the punch to deliver video, audio, control and power like a champ.
BIDIRECTIONAL CONTROL WHATEVER THE PROTOCOL
Need to send control signals both up and downstream? The EX-70-G2 has you covered with IR, RS-232 and even CEC signals able to be passed-through, end-to-end bidirectionally for simultaneous source & display control.
- Extends 4K UHD video content to 35m/115ft
- Compatible with 2160p 4:2:0 60Hz or 4:4:4 & RGB 30Hz Content
- HDCP 2.2 encryption compliant
- Extends 1080p HDMI signal to 70m/230ft
- 2ch PCM and multichannel audio supported up to DTS:X and Dolby Atmos
- 2-Way PoH provides flexible installation options allowing TX or RX only to be powered
- Bidirectional IR & RS-232 pass-through
- Automatic EDID Management (copy from sink device)
- Supports CEC communication between devices
- Low profile 15mm chassis allows easy installation behind flush-mounted screens
- Threaded DC socket for secure power connection
- Visual LED indication for power supply to units, signal status to show established display connection, HDCP presence in signal and HDBaseT™ link between devices
Features
AUDIO AND VIDEO
| Transmitter | Receiver | |
| Inputs | 1x HDMI 19-pin type A | 1x HDBaseT™ 8-pin RJ-45 Female |
| Outputs | 1x HDBaseT™ 8-pin RJ-45 Female | 1x HDMI Out 19-pin type A |
| Output Video Encoding | HDBaseT™ Class B |
| Encoding Data Rate | 9.2Gbps |
| End to End Latency Formats | 10μs (microseconds) |
| Audio Formats | 2ch PCM | Multi Channel up to Dolby Atmos® and DTS-X™ |
| Video Resolutions (Max) | Video Resolution 1920x1080p @60Hz 12bit 1920x1080p @60Hz 16bit 3840x2160p @30Hz 8bit 4:4:4 3840x2160p @60Hz 8bit 4:2:0 4096x2160p @60Hz 8bit 4:2:0 | HDMI 15m/49ft 7m/23ft 7m/23ft 7m/23ft 7m/23ft | Cat6 70m/230ft 70m/230ft 35m/115ft 35m/115ft 35m/115ft | Cat6a/7 100m/328ft 100m/328ft 70m/230ft 70m/230ft 70m/230ft |
| Supported Standards | DCI | RGB |
| Maximum Pixel Clock | HDMI: 300MHz | HDBaseT: 297MHz |
COMMUNICATION AND CONTROL
| HDMI | HDMI | HDCP (v1 chassis 1.4 | v2 chassis 2.2) | EDID Pass-through | CEC Pass-through DVI/D supported with adapter (not included) |
| HDBaseT™ | HDMI | HDCP (v1 chassis 1.4 | v2 chassis 2.2) | EDID Pass-through | 2-way PoH | Bidirectional IR |
| IR | 1x IR TX: 3.5mm (1/8in) TS Mono | 1x IR RX: 3.5mm (1/8in) TRS Stereo |
| RS-232 | 1x RS-232: 3-pin Phoenix (v2 chassis only) |
POWER
| Power Supply | 18V DC 1A |
| Max Power Consumption | Transmitter: 7W | Receiver: 17W |
| PoH | IEEE 802.3af 15.4W Max | 2-way |
ENVIRONMENTAL
| Operating Temperature | 0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing |
| StorageTemperature | -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing |
| Maximum BTU | Transmitter: 24 BTU/hr | Receiver: 58 BTU/hr |
| v1 Chassis | v2 Chassis | |
| Rack Units | Wall Box | <1U | <1U |
| Height With | Without Feet | 15mm/0.6in | 15mm/0.6in |
| Width With | Without Brackets | 109mm/4.3in | 108.8mm/4.29in |
| Depth With | Without Handles | 64.2mm/2.53in | 64.2mm/2.53in |
| Weight | 0.36kg/0.79lbs | 0.36kg/0.79lbs |
REGULATORY
| Safety and Emission | CE | FCC | RoHS |
