Description
SA102 Synergy Array Series Powered Full Range Speaker at EMI Audio
The SA102 full-range powered cabinet is a smaller, lighter and more portable addition to the Synergy Array Series. Providing a reduced footprint without sacrificing sonic integrity, the SA102 is ideal for medium to large venues, outdoor festivals and inclined seating theatres. The SA102 paired with the SA115S subwoofer creates the ultimate point source system built to power stages of all sizes, easy to lift and configure, and grow with you.
Signature to the Synergy series, the SA102 is equipped with the patented Paraline lens to create a precisely shaped wave front that matches the horn's physical coverage pattern. The SA102 uses Synergy Horn technology to maximize efficiency and directivity control by coupling the Paraline Lens with a 10-inch high output woofer.
With a vertical coverage pattern of 7 Degrees Up, 38 Degrees Down, the SA102 can be turned 180 Degrees from top to bottom to accommodate larger audiences. Three top boxes arrayed horizontally together would create a vast 90 Degree coverage pattern.
The SA102 full range speaker paired with the new SA115S subwoofer creates the ultimate point source system built to start at small stages, easy to lift and configure, and grow with you.
Features
-Full-range powered speaker:1200 watts (program), 2400 watts (peak)
-1x10" LF Woofer, 1xHF Compression Driver
-Incorporates Tom Danley's patented Paraline Lens and Synergy Horn technologies
-Exceptionally high output and pristine clarity
-Extremely well controlled coverage pattern
-Measured MAX SPL (C-Weighted, Max Hold): 127 dB Cont, 133 dB Peak
-Frequency Response (Hz +/- 3db): 60Hz-18k
-Dispersion (°H x °V): 30x45 Asymmetrical (7 Up, 38 Down)
-Audio Inputs: 1 XLR, 2 x XLR Loop
-Removable Locking Powercon True Input and Loop Thru Output
-Dimensions (DWH x backW, inches): 21.250 x 17.375 x 22.750 x 6.750
-Made in Canada
Features
Specifications
| System Type | Active Full-Range Powered Speaker |
| Active or Passive | Active |
| Power Rating (Watts) | 1200 Watts Program (2400 Watts Peak) |
| Biampable | Biamp |
| Measured Max SPL (C-Weighted, Max Hold) | 127 dB Cont. 133 dB Peak |
| Frequency Response (Hz +/- 3dB) | 60Hz-18k |
| Dispersion (°H x °V) | 30x45 Asymmetrical (7 Up, 38 Down) |
| Crossover Frequency (Hz) | 750Hz |
| Cabinet Configuration | Patented Synergy Horn and Paraline Lens Technology |
| Driver Configuration | 1x10" LF Woofer, 1xHF Compression Driver |
| HF Driver(s) | 4" Diaphragm/Voice Coil, Neo |
| HF Power Rating (Watts) | 120 watts Program, 240 watts Peak |
| HF Impedance (Ohms) | 8 ohm Load |
| HF Protection | Peak and Average Limiting |
| LF Driver(s) | 1x10" Neo Woofer with 3" Voice Coil |
| LF Impedance (Ohms) | 2 ohm Load |
| LF Protection | Excursion, RMS |
| HF Power Amplifier (Watts) | 300 watts Program, 500 watts Peak |
| HF Amplifier Type | 3-Tier Class H |
| LF Power Amplifier (Watts) | 900 watts Program, 1600 watts Peak |
| LF Amplifier Type | Class D |
| Cooling Scheme | Convection |
| Power Cable | Removable Locking Powercon True Input and Loop Thru Output |
| Power Switch | Yes |
| Power Consumption | 200VA |
| Inputs | 1 XLR, 2 x XLR Loop |
| Input Sensitivity (Vrms Sine) | Line in 1.4 at center, 0.56 at max |
| Level Controls | Volume |
| EQ Controls | HF Boost select, Fullrange/Sub switch |
| LED Indicators | Power, Limit, Clip |
| Enclosure Materials | Multiply 15mm Birch Plywood |
| Standard Rigging Hardware | 1/4-20 Eyebolts (4 Top, 4 Bottom) |
| Stacking Feature | Interlocking UHMW Feet (Top and Bottom) |
| Covering / Finish | Paint |
| Dimensions (DWH xbackW, inches) | 21.250 x 17.375 x 22.750 x 6.750 |
| Dimensions (DWH xbackW, cm) | 54 x 45 x 58 x 17 |
| Weight (lbs/kg) | 69/31.3 |
