Description
Versatile XPRSion: XPRS2 Speaker Series - XPRS1182S
The XPRS2 Series couples the versatility and mobility of the original XPRS Series with elevated sound-performance and audio intelligibility to deliver a high-caliber speaker system for mobile DJs, live sound, houses of worship, rental and fixed installations.
Powerful Class D Amplification
The XPRS2 Series employs Class D Amplification with high output wattage for a powerful and premiere audio experience for performers and listeners alike. The XPRS102 and XPRS122 full-range speakers feature Class D 2000 W amplification, while the XPRS1152S and XPRS1182S subwoofers offer Class D 4000 W amplification.
High Quality, Robust Build
Pioneer DJ’s all-new XPRS2 Series features a sleek all-black, protective pollywood cabinet for performance in harsh outdoor and indoor environments. The series models all come with a durable handle to support system portability and handling during setup and take down. The XPRS2 Series also features rubber feet to create separation and shock absorption between surfaces.
Four DSP Modes
Both of the XPRS2 subwoofers contain three different DSP preset modes—Boost, Extended LF, and Normal—to suit different listening environments.
Accurate Audio Performance / Frequency Response
The XPRS1182S relies on an 18” ferrite woofer with a 3” voice coil with long excursion to produce low frequencies with paramount accuracy.
Offers a 40 Hz – 120 Hz frequency response and 130 dB maximum SPL; the subwoofers pack in the performance of a permanent install subwoofer with the compact mobility required by today’s mobile artists, performers and venues.
Features
Main Features
Amplifier Output -
- Class D
- 4000W peak
What's in the box -
- XPRS1182S x 1 (not sold as a pair)
- Power cord
- Quick start guide
- Important Safety Precautions
Specifications
Supported voltages - 110 V to 240 V (50 Hz/60 Hz)
Power consumption - 800 W
Frequency Range - 40 – 120 Hz
Width - 26.02 in
Height- 21.06 in
Depth - 21.12 in
Weight - 71.21 lb
System characteristic
DSP modes
- EQ Mode Select (3 DSP Preset Modes(Switch))
- LPF
- Polarity
DSP presets modes
Factory presets -
- BOOST
- EXTENDED LF
- NORMAL
Maximum Sound Pressure -130 dB
Terminals
Inputs -
- Left Mono (Combo)
- RIGHT COMBO
Outputs -
- Left Mono (XLR)
- Right (XLR)
Speaker
Driver -
- 18 Inch Ferrite LF Cone Driver
Finish - Black paint, Rubber feet
Handle - 2 (On Both Sides)
Pole socket - 35 mm socket
Enclosure - Plywood (TSCA)
Protection
Amplifier Protection -
- Thermal limiting
- Digital compressor
Driver Protection - Short circuit protection
Power unit Protection -
- Primary AC mains overcurrent protection
- Primary AC mains overvoltage protection
