null

RADIAL J-Iso Balanced +4dB to -10dB unbalanced passive stereo converter, full range

(No reviews yet) Write a Review
SKU:
R800 1025
UPC:
676101038626
Condition:
New
  • RADIAL J-Iso Balanced +4dB to -10dB unbalanced passive stereo converter top view
  • RADIAL J-Iso Balanced +4dB to -10dB unbalanced passive stereo converter inputs
  • RADIAL J-Iso Balanced +4dB to -10dB unbalanced passive stereo converter outputs
  • Using the J-Iso to record a performance
  • Using the J-Iso to convert a balanced signal
  • Using the J-Iso to feed a computer
$329.99

Free & Fast Shipping Over $50!

*Some Exclusions May Apply*

Frequently bought together:

Description

RADIAL J-Iso Balanced +4dB to -10dB unbalanced passive stereo converter, full range. The Radial J-Iso™ and Pro-Iso™ are stereo line isolators designed to convert a professional +4dB line level balanced signal to an unbalanced -10dB consumer level device. This enables you to take the balanced output of a mixer and feed a consumer level recorder or audio input on a computer.

Features

The passive design begins with 100% discrete components throughout. A set & forget level control lets you attenuate the input signal to prevent it from overloading the destination device. Output connections include a stereo pair of ¼" connectors, a set of RCAs and a mini 3.5mm (1/8") for interfacing to a mini recorder or lap-top computer. Transformer isolation helps eliminate hum and buzz caused by ground loops while eliminating stray DC currents from flowing. Construction begins with 14 gauge steel throughout utilizing Radial's unique bookend construction. This creates a protective zone around the connectors and controls for added durability. The steel construction also assists by shielding the transformers from outside magnetic fields. Inside, the J-Iso features an innovative I-beam skeletal insert that makes it virtually impossible to torque the PC board. This reduces potential stress which could cause premature solder joint failure.
 
Specifications  
Audio circuit type: Passive, transformer based
Transformer: Jensen JT-11-YMPC
Number of channels: Stereo (dual mono)
Frequency response: 20Hz ~ 20KHz (+0dB/ -1.5dB)
Dynamic range: 130dB
Total harmonic distortion: 0.001% @ 1kHz
Phase Deviation: 0.5° @ 100Hz; 1° @ 20Hz
Input Impedance: 1.3k Ohms, balanced
Output Impedance: 200 Ohms, unbalanced (when output control is set to max)
Common Mode Rejection Ratio: -58dB
Maximum Input: +20dBu @ 1kHz/1% THD+N
Features
Ground lift, Level Control
Input Connectors: XLR
Output Connectors: 1/4", RCA and 3.5mm TRS unbalanced
General
Construction: 14 gauge steel chassis
Size (L x W x D): 8.4cm x 12.7cm x 4.8cm (3.3" x 5" x 2")
Weight: 0.7 kg (1.55 lbs)
Shipping size (L x W x D): 10.2cm x 7.6cm x 16.5cm (4" x 3" x 6.5")
Shipping weight: 0.87 kg (1.92 lbs)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable
View AllClose

Additional Information

reverb_shipping_profile:
15
reverb_sync:
off
View AllClose